DISEÑO 3D
INSTRUCCIONES para crear un imán 3D
INSTRUCTIONS to create a 3D magnet
Te proporcionaremos la foto de una mascota y su nombre si es necesario ponerle un collar con la placa.
We will provide you with a photo of a pet and its name if it’s necessary to add a collar with a name tag.
A partir de ella, crear una imagen aproximadamente 75% realista con un 25% de toque cartoon.
From it, create an image based on the photo that is approximately 75% realistic with a 25% cartoon touch.
La placa con el nombre debe estar al mismo nivel que el collar.
No debe haber nada más abajo del collar.
The name tag must be at the same level as the collar. There should be nothing below the collar.
Quitar elementos que no puedan ser impresos en 3D, como bigotes y otros detalles.
Remove elements that cannot be 3D printed, such as whiskers and other fine details.
Crear modelo 3D (puedes usar AI)
Create a 3D model (you can use AI)
La altura de la figura siempre debe ser 40mm y el resto que siga las proporciones.
The height of the figure must always be 40mm, and the rest should follow the proportions accordingly.
Corregir posibles errores cometidos por la AI
Correct any possible errors made by the AI.
El espesor mínimo debería ser de 1mm para no tener problemas al imprimir en 3D.
The minimum thickness should be 1mm to avoid issues when 3D printing.
Bisect a unos 20-30mm de donde termina la oreja.
Añadir un anillo que para envolver el imán.
Dimensiónes del anillo:
Exterior 20 mm
Interior 18.4 mm
Sobresale 4 mm
Bisect about 20-30mm from where the ear ends.
Add a ring to enclose the magnet.
Ring dimensions:
Outer diameter: 20 mm
Inner diameter: 18.4 mm
Protrudes: 4 mm
Posición para poner el logo si cabe detrás.
Position for placing the logo on the back, if it fits.
Posición para colocar el logo cuando no quepa detrás.
Position for placing the logo when it doesn’t fit on the back.
Tanto la parte posterior como inferior deben estar pintadas de negro.
Both the back and the bottom parts must be painted black.
¡Y ya tenemos nuestro imán 3D listo para pintar!
Es mucho más rápido de lo que parece y te ayudaremos con cualquier duda y cualquier paso que aún no sepas hacer.
¡Escríbenos si estás interesado!
And now we have our 3D magnet ready to paint!
It’s much quicker than it seems, and we’ll help you with any questions or steps you’re still unsure about.
Write to us if you’re interested!
📩 99tailsofficial@gmail.com